HDPE Block Polyethylene Rectangular Solid (3/4" x 4-½" x 3", 2pcs White)
4 sold in last 24 hours
- Dimensions: You can get 2pcs.The size is 3/4" Thick x 4-1⁄2" Length x 3" Width
- Professional Quality: Tapping block is made of heavy duty HDPE plastic.Has ultra-high abrasion resistance, corrosion resistance, impact resistance and moisture resistance.Our HDPE tapping blocks are built to last
- Many Uses: Tapping blocks help with floor installation, used to tap laminate into place, DIY handmade, easy to cut, easy to machine into parts, precision parts can be made using techniques such as CNC machining, bending and heat gun forming
- Various Sizes: Our tapping blocks are available in a variety of sizes and are professionally machined to cut to meet the vast majority of needs
- High-quality Raw Materials: Impact Resistant - Can be used as a substitute for wood and metal. Low moisture absorption - Suitable for outdoor applications, including plywood replacement applications
Tags |
Estimated shipping
Select a product to estimate shipping.HIGH DENSITY POLYETHYLENE
HDPE is a highly crystalline, non-polar thermoplastic resin.
The crystallinity is 80%~90%, the softening point is 125~135 °C, and the operating temperature can reach 100 °C;
The hardness, tensile strength, and creep resistance are better than those of low-density polyethylene;
Good wear resistance, electrical insulation, toughness, and cold resistance;
Good chemical stability, insoluble in any organic solvent at room temperature, corrosion resistance;
The film has low permeability to water vapor and air, and low water absorption;
The aging resistance is poor, and the environmental stress cracking resistance is not as good as that of low-density polyethylene, especially due to thermal oxidation. Therefore, antioxidants and ultraviolet absorbers need to be added to the resin to improve this deficiency.
High density polyethylene film has a lower thermal deformation temperature under stress, and attention should be paid when applying it.
VARIOUS SHAPE OF PRODUCTS MADE OF HDPE PLASTIC BLOCKS
High density polyethylene has good heat and cold resistance , chemical stability , high rigidity and toughness , and good mechanical strength
Good chemical stability, insoluble in any organic solvent at room temperature, corrosion resistance; Thin films have low permeability to water vapor and air, and low water absorption
Dielectric performance and good resistance to environmental stress cracking
MAIN FUNCTIONS
High density polyethylene resin can be used to form plastic products through injection, extrusion, blow molding, and rotational molding methods.
Various types of containers can be formed.
Various hollow containers, ultra-thin films, etc. can be formed by blow molding.
Extrusion molding can be used to form pipes, stretching strips, bundling strips, monofilament, wire and cable sheaths, etc.
In addition, it can also form decorative panels, louvers, synthetic wood, synthetic paper, synthetic films, and molded calcium plastic products for construction purposes
Q: Is it easy to drill into?
A: With the right drill bit and moderate speed to avoid heat buildup, drilling into this block is straightforward and clean.
Q: Is it resistant to chemicals?
A: Yes! The GYOFFULL HDPE Tapping Block has excellent chemical resistance. One caveat to note: Aging resistance is relatively poor compared to low-density polyethylene, especially under thermal oxidation. So prolonged exposure to extreme heat or UV may affect longevity over time.
Q: How does HDPE compare to UHMW plastic?
A: Choose HDPE for general DIY, machining, and structural applications where cost-effectiveness matters
Choose UHMW when maximum wear resistance and impact strength are the priority (e.g., industrial guides, bearings, heavy equipment)
For most home and DIY projects, HDPE is the practical and budget-friendly choice.
Product details
| Main Specification | |
|---|---|
| Fremstiller | Gyoffull |
| Enhedstælling | 2 Antal |
| Kontoformular | Ark |
| Mærke | Gyoffull |
| Antal elementer | 2 |
| Form | Rektangulær |
| Varens diameter | 0.75 Inches |
| Varens tykkelse | 0,75 tommer |
| Materiale | Polyethylen |
| Farve | Hvid |
| Technical Details | |
| Delnummer | GY-HDPE 3/4" x 4 1/2"x 3" 2pcs |
| Item details | |
| Standardnummer | HDPE 3/4" x 4-½" x 3"，2pcs white |
| Others | |
| Varens højdepunkt | Plastic Tapping Block or High Density Sheet or Great for DIY Projects for Machining Home Floor Improvement |
| Produkttype | Sheets |
| Grade rating | Handelsmæssig |
| Varens form | Rektangulær |