Dremel 4485 Quick Change Rotary Tool Collet Nut Set
4 sold in last 24 hours
- Securely clamp your rotary tool accessories in your Dremel rotary tool with the five piece Dremel collet set.
- For use in all Dremel rotary tools the collet nut set includes the 480, 481, 482, 483 collets plus a collet nut so you can easily use a wide range of bits.
- Includes one Quick-Change collet nut & 4 Collets: 480 (1/8", 3.2mm), 481 (3/32", 2.4mm), 482 (1/16", 1.6mm), 483 (1/32", 0.8mm)
- Compatible with all Dremel cordless and corded rotary tools.
- APPLICATIONS: Collets/Misc. (brown color code)
- Dremel accessories are also color-coded into usage categories, to find more chucks/mandrels/collets/miscellaneous rotary accessories look the brown color code.
- USA-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI.
Estimated shipping
Select a product to estimate shipping.Make the most of your Dremel rotary tools by using our innovative & extensive line of rotary accessories and attachments. Whatever your project, we’ve got the perfect solution for you. Dremel accessories fit inside your rotary tool to extend it’s versatility. Whether you’re looking to carve, engrave, cut, sand or grind, there is a Dremel accessory to get the job done with pinpoint precision. That’s why our purpose-built Dremel accessories let you get your project right down to the last detail. Dremel accessories are also color-coded into usage categories to make it easier for you to select the right accessory for your project. Securely clamp your rotary tool accessories in your Dremel rotary tool with the five piece Dremel collet set. For use in all Dremel corded or cordless rotary tools the set includes the 480 (1/8", 3.2mm), 481 (3/32", 2.4mm), 482 (1/16", 1.6mm), 483 (1/32", 0.8mm) collets plus a Quick-Change collet nut so you can easily use a wide range of bits.
A kit consisting of a special collet nut and four collets for use with a variety of Dremel® tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8".
TOOL MODELS USING THIS KIT
Dremel Keyless Chuck
This keyless 3-jaw chuck allows you to quickly and easily change accessories on Dremel Rotary Tools by eliminating the need to change collets. The accessory adaptor equipped with the quick change chuck works with accessories that have 1/32" - 1/8" shanks. Ideal when the application requires numerous accessory changes. Insert and securely tighten the shank of the accessory well within the 3-jaws of the chuck.
Use with rotary tool models: 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8220, 8200, 800, 780, 770, 7700, 750.
Compatible with Dremel attachments 212, 225, and 575.
Dremel Collets
If you expect to use a variety of accessories, we recommend that in the beginning you purchase a complete set of four collets. Store these so that you will have the proper sized collet for any accessory you want to use.
Quick Change Collet Nut Set - 4485
Includes collet nut and 4 collets (480, 481, 482 and 483). For use with all Rotary Tools except models 1, 2, 260, 270, 280 series 1 or earlier, and 4200.
EZ Change Collets
The EZC480, EZC481, EZC482 and EZC483 are to be used only with the Dremel 4200 rotary tool. They are collets specially made for the EZ change mechanism. EZ Change collets are not compatible with the 225 flex shaft attachment and the 575 right angle attachment.
Tips and Recommendations
Refer your Dremel tool's owner's manual for instruction on changing collets.
Dremel Mandrels
Mandrel - 401
The 401 Mandrel is used with the felt polishing tips and wheels. 1/8" shank.
Small Mandrel - 402
The 402 Small Mandrel has a small at its tip so that it can be used with emery and fiberglass cutting wheels, sanding discs and polishing wheels. 1/8" shank.
EZ Lock Mandrel - EZ402
The EZ402 EZ Lock Mandrel makes accessory changes as easy as pull-twist-release. The one-piece mandrel design simplifies the process of changing cutting wheels, buffs, and detail abrasive brushes (EZ Lock compatib. 1/8" shank.
EZ Drum Mandrel - EZ407SA
The EZ407SA EZ Drum Mandrel makes accessory changes as easy as Pull-Insert-Press Down. The one-piece mandrel design simplifies the process of changing sanding bands. Compatible with all Dremel 1/2" sanding bands (408, 432, 445). 1/8" shank.
EZ Twist Nose Cap
Loosen and tighten the collet and replace an accessory quickly and easily without the need of a wrench. The EZ Twist Nose Cap has an integrated wrench so you'll always have a wrench handy since it's on the tool. No more lost wrenches!
Carbon Motor Brushes
Motor brushes consist of a coiled spring of metal with a piece of carbon at the end. They go under the brush cap and rest on the armature, providing the electrical connection to keep the tool running.
You should check both motor brushes after every 50-60 hours of use. Simply unplug the tool, open the brush caps and remove the carbon piece from the holder. If there is less than 1/8" of carbon left on either brush, they both should be replaced. Only use the motor brush that is compatible with your tool.
Product details
| Main Specification | |
|---|---|
| Fremstiller | Dremel |
| Enhedstælling | 1 Antal |
| Lås type | Manual (keyless) |
| Mærke | Dremel |
| UPC | 080596000196 |
| Antal elementer | 1 |
| Kapacitet | 0.13 inches |
| Inkluderede komponenter | Collet Nut and 4 Collets (1/8", 3/32", 1/16", and 1/32" |
| Varens diameter | 0.13 Inches |
| Kompatible enheder | Drilling Machine |
| Tråd størrelse | 1/8" |
| Materiale | Metal |
| Globalt handelsnummer | 00080596000196 |
| Vægt | 9, 07 g |
| Technical Details | |
| Fabrikantens delnummer | 4485 |
| Materialetype | Metal |
| Håndtagstype | hand-tightened |
| Item details | |
| Standardnummer | 4485 |
| Varetype Navn | Quick Change Collet Nut Kit |
| Fabrikantens garantibeskrivelse | Warranty |
| Others | |
| Varens højdepunkt | 5 Piece Collet Kit or Securely fit rotary tool accessories on Dremel rotary tool or Various sizes 1/8" 3/32" 1/16" 1/32" |
| Produkttype | Quick Change Collet Nut Kit |
| Item part number | 4485 |