RS485 to TTL & TTL to RS485 Auto-Directional Converter
13 sold in last 24 hours
- TTL MODULE RS485
- 1. Ground Output for wire shielding.2. Transceiver Facility (Automatic Switching between Transmit/Receive mode of RS485)3. Twisted pair cable can work up to 1.2 Km distance4. Supports point-to-multipoint, this converter can connect up to 32 RS485 interface device.5. On board 3 Pin 5.08 mm pitch screw terminal to facilitate RS-485 communication wiring.6. Termination Resister Jumper provides option to use in Multi Drop RS485 network.7. Four mounting holes 3.0 mm for easy mounting.
- Can have up to 32 devices on the bus.supports multiple units on the same bus (Multi-Drop).
- 1. Operating Voltage : +5V. With on board RED LED power indication.2. RS485 I/O : D+, D-, Ground.3. TTL I/O : Tx , Rx.
- 1. Built in terminal resistor of 100R Ohm.2. Maximum distance between end-nodes is 1200m.Cable Type preferred for long rang RS485 communication:- Two core, Twisted Pair Shielded type. D+ and D- should be twisted with each other to get optimal range.
Tags |
Estimated shipping
Select a product to estimate shipping.The Silicon TechnoLabs RS485 to TTL & TTL to RS485 Auto-Directional Converter is a versatile serial port card designed for robust communication between devices. This card simplifies connecting devices using RS485 and TTL protocols, offering flexibility for a range of industrial and automation applications.
Key Highlights
- Automatic Switching: The transceiver automatically switches between transmit and receive modes for RS485, simplifying wiring and operation.
- Long Distance Capability: Supports twisted pair cables up to 1.2 km, suitable for extended communication ranges.
- Multi-Drop Support: Connects up to 32 RS485 devices on a single bus, ideal for complex networks.
- Shielded Wiring: Includes a ground output for effective wire shielding, reducing interference.
- Easy Mounting: Features four mounting holes for straightforward installation.
Useful Facts
- Operating Voltage: 5V
- RS485 I/O: D+, D-, Ground
- TTL I/O: Tx, Rx
- Termination Resistor: Built-in 100R Ohm termination resistor.
- Maximum Distance: Maximum distance between end-nodes is 1200m.
Good Fit For
- Industrial Control Systems
- Automation Applications
- Data Acquisition Systems
- Long-Distance Serial Communication
- Devices like 8051, ARM7, AVR, Arduino, and PIC microcontrollers
| Main Specification | |
|---|---|
| Specifikke anvendelser af produktet | automation or Industrial Control Systems or Data Acquisition or Long-Distance Serial Communication |
| Kompatible enheder | Arduino or 8051 or ARM7 or AVR or PIC |
| Fremstiller | Silicon TechnoLabs |
| Enhedstælling | 1 Antal |
| Antal havne | 1 |
| Mærke | Silicon TechnoLabs |
| Antal elementer | 1 |
| Inputspænding | 5 volt |
| Pengemængde | 1 |
| Farve | Grøn |
| Strømtilslutningstype | Ingen plug |
| Forbindelsestype | 3 pin Screw terminal and burg male header |
| Technical Details | |
| Fabrikantens delnummer | STL003V1.1 |
| Oprindelsesland | Indien |
| Item details | |
| Standardnummer | STL003V1.1 |
| Others | |
| Produkttype | Serial Port Cards |
| Boks Indhold | STL003V1.1 |
| Vægt enhed af foranstaltning | 20 mormor |
| Product Finish Type | Silicon |