Slab Flattening Router Bit 1/2 Shank, 6-Wing, 2" Cutting Dia, Insert Carbide CNC Spoilboard Surfacing Router Bit, Wood Planer Planing Bit for Flycutter/ Slab Leveler/ Rabbeting by SICWOOD
7 sold in last 24 hours
- Precise Size: SICWOOD slab flattening router bit with 1/2 Inch shank, 2" Cutting Diameter, Carbide Inserts: 12*12*1.5 mm, 6-Wing, The Max RPM 18,000, the universal Inserts provide on asin "B0CZ8WLD4C "
- 6-Wing Cutting Smoother: This CNC spoilboard surfacing router bit uses solid carbid blade, high hardness, sharpness of blade, smoother cutting, Great for flattening wood.
- Important Safety Note: This 2" (6-wing) flattening bit operates at high RPM and requires precise setup. Check all six carbide inserts for flatness and tightness before use—small deviations (1/32") may cause imbalance and vibration. Test-run below 10,000 RPM first, then increase gradually. Never exceed 18,000 RPM. Use a router with at least 2 HP for safe operation. ensure both safety and a quality slab surface.
- Efficient & Economical: This flattening router bit with replaceable 4-sided carbide Inserts 1.5mm thickness, more Durable and Sharp than other carbide blade, longer life, it is a cost-effective solution.
- Cutting Material: Used on planing and rabbeting the following materials: MDF/Plywood /Chipboard /Plastic /Acrylic / Fiberboard/Balsa/HDU Board /HDF/LDF / Epoxy (Epoxy Resins) / Hardwood/Softwood
- FOR Equipment: Use on router sled for flattening slabs, and other CNC machine. Make sure that your router sled rails are fully stable and squared, Make sure the screws are tight
Estimated shipping
Select a product to estimate shipping.Slab Flattening Router Bit 1/2 Shank, 6-Wing, 2" Cutting Dia, Insert Carbide CNC Spoilboard Surfacing Router Bit, Wood Planer Planing Bit for Flycutter/ Slab Leveler/ Rabbeting by SICWOOD
1/2 Inch shank, 2" Cutting Diameter, Carbide Inserts: 12*12*1.5 mm, 6-Wing
The Max RPM 18,000, the universal Inserts provide on asin "B0CZ8WLD4C "
SICWOOD slab flattening router bit with replaceable 4-sided carbide Inserts 1.5mm thickness
more Durable and Sharp than other carbide blade, longer life, it is a cost-effective solution
Safety Instructions:
Dust and chips from laminate materials are hazardous to your health and safety. Please wear a dust mask and eye protection when routing.
Do not wear gloves to avoid hazard of getting caught in the tool and pulling your hand in to get mangled during bit spinning.
Examine the bits before use for cracks or chips. Do not use damaged or bull bits.
Make sure bits are properly secured in collect and reach the indicator mark. Make sure the screws are tight
Product details
| Main Specification | |
|---|---|
| Manufacturer | SICWOOD |
| Cutting Diameter | 2 Inches |
| Brand | Sicwood |
| Number of Items | 1 |
| Cut Type | flattening cut |
| Included Components | 1 * surfacing router bit 1/2 shank |
| Item Diameter | 2 Inches |
| Material | Tungsten Carbide |
| Size | 2" Dia - 6W |
| Item Weight | 0.22 kg |
| Technical Details | |
| Part Number | surfacing12.7SIC01 |
| Model | surfacing12.7SIC01 |
| Material Type | Tungsten Carbide |
| Number of Flutes | 6 |
| Others | |
| Product Type | Edge Treatment & Grooving Bits |
| Size Name | 2" Dia - 6W |